Red Apex Lights™ deliver increased visibility (5x brighter than OEM brake lights) and a custom Plug & Play installation for the Can-Am Maverick X3. Apex Lights™ are IP67-rated and 100% waterproof. Plus, they’re effectively indestructible, with polycarbonate lenses and aluminum heat-sink frames.
Each Pair of Apex Lights™ includes:
Pulsing brake light feature for increased visibility
Plug & Play wiring for the Can-Am Maverick X3. DIY install in under 30 minutes
Multi-Mount hardware: mount to body panels, roll cage, roof, or bumper
Turn signal compatibility with any Plug & Play UTV turn signal kit
If you somehow break one of our products, we’ll send you a replacement at no
charge. Because when you buy RAVEK, you’re getting a SxS upgrade for life.
Every RAVEK product comes with an Unlimited Lifetime Warranty:
Lasts Forever: Our warranty never expires
Total Coverage: Includes all RAVEK products and their components
Fully Transferable: Covers original and future owners
We stand behind everything we build, so you can ride on with confidence.
Introducing the first-ever 100% Plug & Play UTV running and brake light. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights™ have raised the standard for UTV accent lighting.
Here’s an overview of what you get with the Red Apex Lights™:
Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
Custom Plug & Play wire harnesses for the Can-Am Maverick X3
Multi-Mount Hardware: mount Apex Lights™ to any flat body panel, roll cage, roof or bumper
KEY SPECS
5x Brighter than Can-Am OEM rear running and brake lights
54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
Aluminum heat-sink frame
Extreme lighting efficiency: 2 Amps per pair of Apex Lights™
PULSING BRAKE LIGHTS
When you brake, the Red Can-Am Maverick X3 Apex Lights™ pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear you’re slowing down.
The Can-Am Maverick X3Apex Lights™ are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.
PERFECTLY DIFFUSED LIGHT OUTPUT
The Can-Am Maverick X3 Apex Lights™ are engineered to display perfect LED diffusion. That means Apex Lights™ throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”.
LIGHTING CUSTOMIZATION & MOUNTING OPTIONS
Apex Lights™ unlock a new level of UTV customization and safety. RAVEK’s Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:
Exterior Body Panels (rear and/or side panels)
Roll Cage
Roof
Bumpers
Each Apex Lights™ kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25” – 2.5” roll bar or bumper.
Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.
ADD LIGHTING HIGHER UP ON YOUR UTV
The original concept behind the Apex Lights™ was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines – they dramatically increase visibility and make our machines easy to pick out of a group.
EXTREME LIGHTING EFFECIENCY
With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights™ as you want to give your SxS a truly custom look.
If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.
DESIGNED FOR DIY INSTALLATION
Our engineers designed the Can-Am Maverick X3Apex Lights™ to install simply and securely, every time. No prior installation experience required – we promise.
First-time installers can expect to complete the DIY installation in under 30 minutes.
The Can-Am Maverick X3 Apex Lights™ include 100% custom Plug & Play wiring and mounting hardware for your Maverick X3.
RAVEK’s vehicle-specific installation video guides walk you through each step of the process to deliver a fun and efficient DIY installation experience.
TURN SIGNAL COMPATIBILITY
If you already have a Plug & Play UTV Turn Signal Kit Installed, you can easily sync Red Apex Lights™ to blink in unison with your existing turn signal lights. All necessary components included.
If you’re interested in making your UTV street legal, check out RAVEK’s full Turn Signal Kit for the Can-Am Maverick X3HERE.
Features
500% Brighter Than OEM Taillights
Be prepared and visible in dusty or low-visibility conditions. The Apex Light™ runs 5x brighter than X3 stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8” rigid lenses.
Customized To You With Next-Generation Diffused LEDs
Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. Fully Plug & Play installation for the Maverick X3 in under 30 minutes with no drilling required. Add up to three sets – six lights total – on your roof, roll bar, rear bumper, or wherever else you can imagine. Custom diffusion reflector delivers an even, futuristic look.
Rugged, Nearly Indestructible Formed Lights
IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.
Technical Specifications
Waterproof Rating
IP67
Amperage
0.25A - 1.1A
Raw Lumens
White
1,512
Amber
1,080
Red
378
Watts
10.5 - 15.4
Temperature Rating
-40° F - 140° F
The hottest temperature recorded on Earth is 134.1° F on July 10, 1913 in Death Valley.