Full Street-Ready Turn Signal System. With Ranger XP 1000 Replacement Headlights.
You Break It, We Replace It.
If you somehow break one of our products, we’ll send you a replacement at no charge. Because when you buy RAVEK, you’re getting a SxS upgrade for life.
Every RAVEK product comes with an Unlimited Lifetime Warranty:
We stand behind everything we build, so you can ride on with confidence.
See our full Warranty Policy for more detail
If you are not 100% satisfied with your RAVEK product, just call or email our Wisconsin based customer support team, and we’ll make it right.
Why Speakeasy™ Replacement Headlights for your Ranger XP 1000.
Speakeasy™ was built to solve the most frustrating part of installing a turn signal kit: routing wires from the front of the UTV to the taillights and tearing apart the cab to do it. The Replacement Headlights solve the other half of the install, getting a clean, OEM-fit front lighting option without adding brackets, inserts, or extra hardware.
Instead of our Apex Lights, this kit replaces your factory Ranger XP 1000 headlights outright with vehicle-specific assemblies that are Plug & Play, direct-swap installs. Turn signal, hazard, & white running lights functions are built into the headlight itself. The turn signals blink in a sequential sweep, and when hazards are activated, both sides sweep together.
Like the rest of the Speakeasy™ lineup, front-to-rear communication runs on RAVEK's wireless connection between the Front Control Module and Rear Receiver, eliminating the need for wire routing and full cab teardown that traditional turn signal kits require. The connection pairs automatically every time the UTV turns on, no app or manual pairing required.
The Speakeasy™ Replacement Headlight Kit is a full street-ready turn signal system. What's Included:
Front Lighting
Vehicle-Specific Control
Speakeasy™ Wireless Front-to-Rear Connection
Additional Features
Every kit is backed by RAVEK's Unlimited Lifetime Warranty.
⚠ WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see: http://www.p65warnings.ca.gov/motor-vehicle-parts
The Ranger XP 1000 Replacement Headlight kit is a straightforward Plug & Play installation with an OEM look.
Step 1: MOUNT FRONT CONTROL MODULE AND HORN (Plug & Play wired like standard turn signal kits)
Step 2: CONNECT OEM DASH INDICATORS (Plug & Play wired like standard turn signal kits)
Step 3: MOUNT STEERING COLUMN LEVER (Includes steel mounting bracket specific for Ranger XP 1000)
Step 4: CONNECT REAR RECEIVER TO OEM TAILLIGHTS AND REAR MAIN HARNESS (Plug & Play wired like standard turn signal kits)
Step 5: INSTALL FRONT HEADLIGHTS AND TEST KIT (Plug & Play wired like standard turn signal kits)
INSTALLATION VIDEO RESOURCES
If there is a problem with your Speakeasy kit, the system may trigger an alert to let you know there is a connection issue between the controller and the receiver.
Lost Connection While Driving
If the controller and receiver lost connection for 15 seconds while the vehicle is running:
No Connection at Startup
If the controller does not detect a paired receiver after searching for 5 seconds at startup:
Are the Ranger XP 1000 Headlights Plug & Play?
Yes. This kit is 100% Plug & Play for the 2025+ Ranger XP 1000 models.
Do the replacement headlights have sequential turn signals?
Yes. When you activate the turn signal or hazards, the Replacement Headlight blinker sweeps in an amber pattern.
Is the wireless connection Bluetooth? Does it require an app?
No. The kit includes the lights and harnessess. Everything plugs directly into your exisiting RAVEK turn signal kit.
What happens if I somehow damage the Front Control Module or Rear Receiver?
We back all of our products with an Unlimited Lifetime Warranty. You'll receieve a replacement part by contacting our Customer Service Team at 855-617-3787 or emailing us at gearup@ravek.com
If there is a problem with your Speakeasy kit, the system may trigger an alert to let you know there is a connection issue between the controller and the receiver.
Lost Connection While Driving
If the controller and receiver lost connection for 15 seconds while the vehicle is running:
No Connection at Startup
If the controller does not detect a paired receiver after searching for 5 seconds at startup:
RAVEK delivers the only 100% complete, road-ready Plug & Play UTV Turn Signal Kit. Each kit includes everything you need: Front running & turn signal lights + mounts, OEM taillight turn signal and hazard integration, vehicle-specifiic turn lever (auto-canceling), horn, hazards, dash indicators, and license plate holder.
Simple, truck-style controls: RAVEK's Steering Column Lever controls left/right turn, horn, hazard, and the new "Emergency" mode. No rocker switches required. The lever is auto-canceling, no manual reset required. Plus, the included vehicle-specific steel mounting plate ensures an OEM-grade fit and feel.
Replacement Headlights specific to the Ranger XP 1000s. White running lights, sequential pattern signals for turn, hazard, and emergency strobe functionalities. Easy Plug & Play connections to the Speakeasy controller.
| Price | $819.95 |
|---|---|
| Pre-ordered Item (RAVEK) | Yes |
| Hide Select Vehicle | No |
| Pre-order messaging | Pre-Order Now |
