If you somehow break one of our products, we’ll send you a replacement at no
charge. Because when you buy RAVEK, you’re getting a SxS upgrade for life.
Every RAVEK product comes with an Unlimited Lifetime Warranty:
Lasts Forever: Our warranty never expires
Total Coverage: Includes all RAVEK products and their components
Fully Transferable: Covers original and future owners
We stand behind everything we build, so you can ride on with confidence.
The HD11 Signature Light Add-On Kit was made for the those who already have a RAVEK HD11 Turn Signal Kit installed and want to complete the full factory look. We know higher trims come with running lights in this location but that's all they are - running lights.
These aren't just running lights. The RAVEK Signature Lights function as daytime running lights and flip to a sequential amber pattern when you signal or activate hazards - syncing in perfect unison with your Apex front lights and OEM taillights. The entire turn signal system blinks together, making sure you're seen on the road and trail.
This is a plug & play add-on. Your turn signal kit already has every it needs to run these lights. The kit gives you the lights and the harnesses to tie in your exisiting setup. Nothing extra. Nothing complicated.
What's Included:
Front Lighting
Pair of RAVEK Signature Lights.
Vehicle-specific Plug & Play front connections to pair with your current kit.
Signature Light Functions
White running lights.
Amber sequential sweep for turn signals & hazards.
Capability
Compatible with any RAVEK HD11 Turn Signal Kit.
Mounts in the factory Signature Light location above the headlights.
Uses factory hardware for an easy installation.
Every kit is backed by RAVEK's Unlimited Lifetime Warranty.
⚠ WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see: http://www.p65warnings.ca.gov/motor-vehicle-parts
The HD11 Signature Light Add-On Kit is a simple Plug & Play installation for any exisitng RAVEK HD11 Turn Signal Kit owner.
Step 1: MOUNT SIGNATURE LIGHTS (Mount left and right Signature Lights in the factory location above the headlights).
Step 2: CONNECT HARNESSES TO EXISITING TURN SIGNAL KIT (Plug the included harness into your RAVEK Turn Signal Kit. Minimal additional wiring required).
INSTALLATION VIDEO RESOURCES
For a detailed walkthrough of the installation process, see the full installation video.
Questions? Call RAVEK's Wisconsin-based technician support line: 855-617-2787.
If there is a problem with your Speakeasy kit, the system may trigger an alert to let you know there is a connection issue between the controller and the receiver.
Lost Connection While Driving
If the controller and receiver lost connection for 15 seconds while the vehicle is running:
A horn and flash alert will activate.
After 12 minutes, a flash alert will activate again.
Every 6 minutes after that, another flash alert activate.
If a turn signal is used, the system will trigger a flash and horn alert.
No alerts will activate from brake inut, horn input, or hazard input.
No Connection at Startup
If the controller does not detect a paired receiver after searching for 5 seconds at startup:
A countdown timer will begin.
After 12 minutes, a flash alert will activate.
Every 6 minutes after that, another flash alert will activate.
If a turn signal is used, the system will trigger a flash and horn alert.
No alerts will activate from brake input, horn, input, or hazard input.
Which RAVEK HD11 Turn Signal Kits does this work with?
The HD11 Signature Light Add-On Kit is compatible with any RAVEK HD11 Turn Signal Kit, both Gen2 or Gen3 Speakeasy™. If you have a RAVEK HD11 kit, this add-on works with it.
How does the sequential turn signal work?
When you activate the turn signal or hazards, the Signature Lights sweeps in an amber sequential pattern. It blinks with your exisiting Apex front lights and OEM taillights through your RAVEK control module.
Do I need any additional parts or wiring?
No. The kit includes the lights and harnessess. Everything plugs directly into your exisiting RAVEK turn signal kit.
Can you just make my exisiting accent lights blink?
Unfortunately, no. While some higher trim HD11 come with factory running accent lights, they do not blink. RAVEK's Signature Light kit gives you the added benefit of a sequential turn signal function.
What if I have an issue with my kit?
RAVEK's Unlimited Lifetime Warranty has got you covered. You break it, we replace it. Call our Wisconsin-based customer service line with any questions: 855-617-2787.
If there is a problem with your Speakeasy kit, the system may trigger an alert to let you know there is a connection issue between the controller and the receiver.
Lost Connection While Driving
If the controller and receiver lost connection for 15 seconds while the vehicle is running:
A horn and flash alert will activate.
After 12 minutes, a flash alert will activate again.
Every 6 minutes after that, another flash alert activate.
If a turn signal is used, the system will trigger a flash and horn alert.
No alerts will activate from brake inut, horn input, or hazard input
No Connection at Startup
If the controller does not detect a paired receiver after searching for 5 seconds at startup:
A countdown timer will begin.
After 12 minutes, a flash alert will activate.
Every 6 minutes after that, another flash alert will activate.
If a turn signal is used, the system will trigger a flash and horn alert.
No alerts will activate from brake input, horn, input, or hazard input.
Features
PLUG & PLAY ADD-ON.
The HD11 Signature Light Add-On Kit includes everything you need to complete your machine. A pair of RAVEK Signature Lights, Plug & Play harnesses, and it uses OEM hardware. Plugs directly into your exisiting RAVEK HD11 Turn Signal Kit.
AN OEM LOOK WITH TURN SIGNALS.
Cam-Am OEM Signature Lights don't blink. Now they can - while keeping the white running lights, our Signature Lights blink amber when you signal. They blink in tandem with your exisiting Apex Lights. And with the OEM taillights, your whole machine signals togethjer.
Technical Specifications
Waterproof Rating
IP67
Dimensions
Fits perfectly in the OEM Signature Light Location.
Compatibility
Our Add-On Kit works on both Speakeasy and standard, wired HD11 RAVEK Turn Signal Kits.
